Limits Flame Spread
Helps control the growth of the fire and limit its spread to surrounding combustible surfaces.
Purpose & Mechanism of Action
NOT JUST THE FLAME, THE ENTIRE FIRE IS TARGETED
Conventional fire suppression methods primarily focus on extinguishing visible flames. 3-F combines fire suppression, rapid cooling and protective action against reignition within the same intervention process.
Flame Control
Rapid Cooling
Barrier Effect
3-F
Triple Action
SUPPRESSES
COOLS
PROTECTS
01
Purpose of Application
NOT JUST TO SUPPRESS THE FIRE, BUT TO BRING IT UNDER CONTROL
In fire intervention, making the visible flame disappear is not enough. As long as high temperatures remain, the risks of reignition, fire spread to surrounding materials and repeated intervention continue.
3-F is designed to address different stages of the fire simultaneously, supporting a faster, more controlled and more sustainable intervention process.
Reduces Heat Load
Designed to rapidly reduce surface and ambient temperatures following flame suppression.
Reduces Reignition Risk
Helps reduce the risk of renewed combustion through the protective effect formed on the treated surface.
Reduces Intervention Time
Combining suppression and cooling within the same intervention may reduce the need for additional operations.
02
Three-Stage Action
HOW DOES 3-F WORK?
The product's action consists of three complementary stages: flame control, rapid cooling and protective barrier formation.
01
First Action
SUPPRESSES THE FLAME
When applied to the fire zone, the product comes into contact with the burning surface, helps restrict the combustion process and supports bringing the fire under control.
- Rapid initial intervention
- Limitation of flame spread
- Direct contact with the burning surface
02
Second Action
REDUCES TEMPERATURE
As the flames are suppressed, the process also targets the reduction of high surface temperatures. This helps control the heat load that could otherwise contribute to reignition.
- Simultaneous suppression and cooling
- Limitation of heat transfer
- Reduced need for repeated intervention
03
Third Action
CREATES A BARRIER
The protective layer formed on the treated surface helps increase resistance against renewed flame exposure and contributes to reducing the risk of reignition.
- Protective surface effect
- Reignition control
- Preventive application capability
The Difference in Intervention
WHEN THE FLAME IS OUT, THE RISK MAY STILL REMAIN
Conventional Approach
FLAME SUPPRESSION
Visible flames are extinguished
However, high temperatures may remain on the surface.
Additional cooling may be required
Intervention may need to continue with additional equipment or applications.
Reignition risk may remain
Renewed combustion can occur as long as heat and combustible surface conditions remain.
3-F
Next-Generation Approach
TRIPLE ACTION
Flames are brought under control
Initial intervention is performed while limiting the spread of the fire.
Temperature is reduced simultaneously
Suppression and cooling take place within the same operation.
A protective barrier effect is formed
The treated surface gains additional resistance against reignition.
Application Process
INTERVENTION PROCESS
The appropriate product concentration and equipment selection should be determined according to the fire type and application conditions.
01
ASSESS THE RISK
Fire class, combustible material, temperature and site conditions are evaluated.
02
DETERMINE THE RATIO
The appropriate concentration is selected according to suppression, cooling or barrier application requirements.
03
APPLY THE PRODUCT
The product is applied to the fire zone or the surface requiring protection using suitable intervention equipment.
04
MONITOR THE AREA
Temperature, reignition risk and the protective effect on the treated surface are monitored.
Technical Assessment
THE RIGHT APPLICATION DELIVERS THE RIGHT RESULT
Product performance may vary depending on fire class, concentration, intervention equipment, surface characteristics and environmental conditions. A technical assessment should be carried out before application.
3-F Technology
LET US DETERMINE THE RIGHT SOLUTION FOR YOUR FIRE RISK
Contact our team for technical information and application recommendations tailored to your facility, vehicle fleet or specific risk area.